Wheel Rim Decals – Race Line (Closeout)

Description

Clearance

Kit Stickers jante Anneau – Race Line (pour 2 jantes 17?) :

This Kit requires removal of both rims to be installed.

Notre kit deco jante moto 17 pouces Anneau – Race Line pour les 2 jantes comprend :

• 2 Stickers en cercle 17 pouces,  5cm pour jante 17 pouces arrière. Bleu
• 2 Stickers en cercle 17 pouces,  3cm pour jante 17 pouces avant. Bleu

*Tous nos stickers sont pourvus d’une plastification qui leur permet une tenue permanente mais aussi, une résistance aux projections d’eau et aux UV.
Our high-quality vinyls are designed and manufactured in France. Our rim stickers Ring - Race Line sont également idéal pour protéger vos jantes.

Tips and tutorial for installing the 17-inch Motorcycle Rim Decal Kit Ring:

Nos stickers de jantes Anneau – Race Line sont très simples à pose. Tu trouveras ci-dessous un tutoriel pour t’aider à poser correctement ton kit stickers Anneau. Avant toute chose, voici les précautions à prendre :

• Verify that the rim must be smooth.
• Clean thoroughly, degrease the rim with soapy water/alcohol. Do not use WD40 or other silicone-based products. The rim must be perfectly clean.
• Do not handle stickers from the adhesive side.
• If the stickers are not applied immediately, store them in a dry place, protected from sunlight.
•  When applying, choose a surface with a temperature of at least 15°C, protected from wind and dust. It's also possible to heat the rim before applying the stickers to ensure good adhesive hold. Too low a temperature will not allow for optimal sticker adhesion.
• After application, avoid contact with cold and moisture to ensure good adhesive hold.