Stickers jante Kawasaki ER6-F – Destockage

Description

Stickers jante Kawasaki ER6-F (kit pour 2 jantes) :

Le kit deco jante moto 17 pouces Kawasaki ER6-f pour les 2 jantes comprend :

• 8mm pre-curved edgings with 8 small stickers Kawasaki and 8 small stickers ER6N for the 2 rims
• 4 Stickers rim interiors Kawasaki
• 4 Stickers intérieurs de jantes ER-6f
• 1 Logos Kawasaki
• Professional quality with permanent hold*.

*autocollants avec colle monomère 100? qui permet une tenue permanente mais aussi une résistance aux projections d’eau et aux UV.
Nos Vinyles haute qualité sont conçus et fabriqués en France.

Stickers Jante Kawasaki ER-6f – comment les poser ?

Stickers moto kawasaki ER6f est simple à poser, quelque soit la taille ou la surface de la jante, le procéder reste le même. Tu trouveras ci-dessous un tutoriel pour t’aider à poser correctement ton kit stickers jante moto kawasaki ER6-f. Avant toute chose, voici les précautions à prendre :

• Check that the rim is perfectly smooth.
• Clean and degrease the rim with soap/alcohol water. Do not use WD40 or other products with silicone. The rim must be perfectly clean.
• Do not handle the stickers on the glue side.
• If the stickers are not installed immediately, store them in a dry place out of the sun.
•  At the time of the installation, choose a room with a temperature of at least 15°c, sheltered from wind and dust. It is also possible to heat the rim before installing the stickers to ensure a good adhesion of the adhesives. A too cold temperature will not allow an optimal adhesion of the stickers.
• Add our scraper to your Order to not miss the installation of your stickers motorcycle rim
• After the installation, avoid contact with cold and humidity to guarantee a good adhesion of the adhesives

Complete TUTO to install your rim decoration kit :

Complete video tutorial for the installation of the rim decoration kit:

Est-il possible de personnaliser mes stickers moto kawasaki ER6-F?

Personalize your stickers motorcycle rim with our effects! We propose for your rim decoration kit the following effects: Holographic / Photoluminescent / Retroreflective / Fluo / Gloss / Mat. -> Go here to know more about our effects of stickers !

You can also customize your own rim decoration kit with our instant configurator!

Kit deco jante Kawasaki ER6f, quelles couleurs possibles ?

Our motorcycle rim deco kits are available by default in the following colors: White / Black / Red / Orange / Yellow / Green / Cyan / Blue / Pink. You can also choose the color you want with our specific color option or by going on our configurator!

A question about the rim decoration kit? A request for customization ? Do not hesitate to contact us via the page contact :